Flywheel Fits Integra

Clutchmasters FW 694 SF Steel Flywheel fit Acura Integra 90 93 4cly. 1.8L

Clutchmasters FW 694 SF Steel Flywheel fit Acura Integra 90 93 4cly. 1.8L

Clutchmasters FW 694 SF Steel Flywheel fit Acura Integra 90 93 4cly. 1.8L    Clutchmasters FW 694 SF Steel Flywheel fit Acura Integra 90 93 4cly. 1.8L

Clutchmasters FW-694-SF Steel Flywheel 4140 Steel: One-piece unit to handle extreme abuse. SFI Certified Clutch Masters Flywheels are designed and tested to ensure the safety and quality of every flywheel. Years of R&D has given us the knowledge and firsthand experience to choose wisely the best material to manufacture flywheels that will surpass your expectations. Depending on the application the majority of Clutch Masters flywheels are made from 6061 T6 Billet Aluminum 1045 or 4140 Billet Steel.

Clutch Masters Flywheels are SFI Certified meeting performance standards for the automotive and motorsport industry. Benefits of a Clutch Masters Light Weight flywheel: Light-weight for improved performance and Quicker Revs. (Aluminum Flywheels) Consist of a replaceable heat shield (friction surface) eliminating need to resurface flywheel. Reduces turbo lag in turbo-charged engines. Increased supercharger efficiency due to less drag on the crank. Improved mid-range torque in naturally aspirated engines. Replacing your OE flywheel with a light weight flywheel may cause gear noise or a vibration that may not be suitable for everyone. The lighter the flywheel the more gear noise will be produced. Depending on the application Clutch Masters usually recommends Steel flywheels rather than Aluminum flywheels since Aluminum flywheels will cause more gear noise.

Aluminum flywheels are usually only recommended for race applications looking to have the least amount of weight as possible. A light weight flywheel may affect the life expectancy of a clutch kit depending on the application. Going from a Dual-Mass Flywheel (DMF) to a Single-Mass Flywheel (SMF): A Dual Mass Flywheel (DMF) is a flywheel in two concentric parts or two facing flywheels stuck together with flexible compound to damp down transmitted vibration and gear rattle for the gear box. Many newer model vehicles now come standard with a factory DMF.

Many times enthusiast choose to replace a DMF with a SMF and here is why: DMFs tend to be more expensive than a SMF. DMFs are not designed to be resurfaced like conventional SMF. DMFs usually weigh 30+ lbs depending on the application which will cause unwanted turbo lag.

DMFs cannot withstand a high rate of abuse and may fail under spirited driving. Benefits of switching to a SMF: Reduced mass equals increased acceleration. SMF are able to be resurfaced and can be reused. Clutch Masters offers Aluminum or Steel SMF depending on the application.

We recommend you replace your DMF with a Steel SMF if the vehicle will be driven on the street since it will produce less noise and will be more pleasant to drive on the street compared to an Aluminum SMF. Aluminum flywheels are only recommended for race applications looking to have the least amount of weight as possible. By replacing a DMF with a SMF you may experience gear rattle and a vibration that may not be suitable for everyone. SMF may also reduce the life expectancy of a clutch kit depending on the application. NOTE : IMAGE SHOWN MAY NOT BE ACTUAL PRODUCT PLEASE CALL FOR DETAILS.

THIS PRODUCT FITS THE FOLLOWING. 1.8L; VTEC non-V Type R.

High Technology Makes the Difference. Historically high performance clutches have been a compromise. While improving holding or clamping pressure manufacturers nearly always increase pedal pressure to an uncomfortable point especially for stop-and-go traffic.

Besides drivability concerns additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear leading to missed shifts damaged clutch components and even engine destruction. Today thanks to Clutch Masters increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage. Technique Clutch Masters has increased clamping power often without changing pedal pressure. Excessively increased pedal pressure as found in many of today's traditional high performance clutches places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles.

Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage. A clutch simply put is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission.

As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into pla. ABOUT AMCO AUTO PARTS, LLC. Since 2002 AMCO Auto Parts, LLC has been striving to supply and support car enthusiasts around the world with the products and service they deserve. With the economy the way it is we understand how important pricing is.

Here at AMCO Auto Parts, LLC our car parts are some of the lowest prices around. With that in mind you will not lose quality. We offer auto car and truck parts from nearly 150 manufacturers.

These companies are some of the most highly regarded in the automotive industry today. Our highly skilled staff is ready to answer any of your questions. Should you have any question, please message us! We would like to thank our new and existing customers for their trust and support in our company. AMCO Auto Parts, LLC will continue to provide top notch customer service along with quality car parts and low pricing.

Product images may not be vehicle specific. If you feel I do not deserve that then please contact me as I try to make sure every customer is 100% satisfied. The item "Clutchmasters FW 694 SF Steel Flywheel fit Acura Integra 90 93 4cly.

1.8L" is in sale since Monday, December 10, 2018. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Clutches & Parts". The seller is "web_amcoautoparts" and is located in Paterson, NJ. This item can be shipped worldwide.

  • Manufacturer Part Number: FW-694-SF
  • Brand: Clutch Masters
  • Warranty: Yes


Clutchmasters FW 694 SF Steel Flywheel fit Acura Integra 90 93 4cly. 1.8L    Clutchmasters FW 694 SF Steel Flywheel fit Acura Integra 90 93 4cly. 1.8L