Flywheel Fits Integra

CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16

CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16
CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16
CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16
CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16
CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16
CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16
CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16

CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16    CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16
The ClutchXperts Stage 2 Racing Clutch Setup is On and Off Type Clutch Setup for those who need More Grip over a conventional stock clutch system. Yet this clutch setup is also for those of you driving daily and occasional street racing use. This clutch Uses a Heavy Duty pressure plate with a full facing Organic Street Steel backing Racing Disc clutch setup has higher burst strength with more heat tolerance and handles more stresses. This clutch is engineered for both street use and perfect for daily driving with minor modifications with longer lasting over stock or Stage 2 clutch setup due to more strength from more clamping force on diaphragm, and more rivets. Stage 2 offers smooth gear shift and also clutch pedal as well.

It is specifically designed for Extended Wear and Additional Clamping Force for Enthusiasts Who Has Added an exhaust system, an Intake System and Minor External Bolt-ons. It features only slightly increased pedal pressure, longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation. Our Stage 2 uses a heavy duty pressure plates use for daily and occasional Street ClutchXperts Exclusive Friction Composition. ClutchXperts Stage 2 HD Organic Racing Clutches uses only use premium friction materials that are resistant to slippage and burst.

Increased clamp loads give the necessary capacity to handle modified engines. This is the preferred clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads.

All of our Stage 2 clutch discs have as spring center dampers to reduce drivetrain shock. Our Stage 2 Racing Clutch Kits Includes a heavy duty Stage 2 pressure plate, HD Organic Street Racing disc, throwout bearing, pilot bearing (if required) and alignment tool.

Individual components available upon request. If you are selecting a kit without a new flywheel, then be sure to resurface and rebalance your old flywheel prior to installation for best performance and result. The ClutchXperts Forged Chromoly lightweight flywheel carries significant benefits, with no disadvantages. Due to its reduced mass, it allows an engine to have quicker throttle response and rev faster under acceleration. Conversely, under a drop throttle condition, the car will slow down quicker due to less rotational mass at the crank. Though it does not create additional horsepower, the flywheel does allow the engine to more rapidly transfer its power to the drive train. You lose nothing in reliability, safety, or drivability on the street. What you gain is neck-snapping acceleration from your car. Using a lightweight, ClutchXperts lightweight flywheel is a race proven way to improve the performance of any street or race car. Lightweight flywheels have been used for many years by the world's most elite cars to improve both useable horsepower and extend engine life. ClutchXperts Stage 2 Heavy Duty Pressure Plate (2000lbs Clamping Load).

ClutchXperts Stage 2 Full Face Ceramic Racing Disc (220mm, 24 Spline). ClutchXperts Forged Chromoly Lightweight Racing Flywheel (9lbs). ClutchXperts Premium Heavy Duty Clutch Throwout Release Bearing.

ClutchXperts Premium Heavy Duty Clutch Pilot Bearing. ClutchXperts Premium Heavy Duty Clutch Alignment Tool. Fits 1999 - 2000 Honda Civic Si (B16 1.6L 4cyl DOHC VTEC).

Manufacture Part Number : CXP-HCS54019HP2 CXP-HCS54019CF-10. Surface Finish : Cast Iron, Ceramic, Forged Chromoly, Steel.

Country of Manufacture : United States. FILE PICTURES ARE FOR REFERENCE ONLY.

Must be in brand new, resalable condition. We are located in Southern California. The item "CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16" is in sale since Wednesday, April 24, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Clutches & Parts". The seller is "clutchxperts_usa" and is located in Anaheim, California. This item can be shipped worldwide.
  • Manufacturer Part Number: CXP-HCS54019HP2 CXP-HCS54019CF-10
  • Warranty: Yes
  • Brand: ClutchXperts
  • Country/Region of Manufacture: United States
  • Surface Finish: Cast Iron, Ceramic, Forged Chromoly, Steel
  • Clutch Material: Ceramic
  • Clutch Disc Style: Full Face
  • Pressure Plate Type: Diaphragm
  • Horse Power: 279lb-ft
  • Torque: 299HP

CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16    CXP STAGE 2 CLUTCH+9LBS FLYWHEEL KIT Fits 1999-2000 HONDA CIVIC SI DOHC VTEC B16