Flywheel Fits Integra

Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681

Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681
Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681
Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681
Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681

Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681   Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681

4 Wheels - Road Tuning. Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 - 191681. A Fidanza Lightweight Aluminium Flywheel with Replaceable Friction Plate will improve the keenness of your engine and make for easier shifting, particularly on sporty downshifts. Easier throttle blips for downshifts. The flywheel between the engine and the gearbox.

Its purpose is to smooth out the rotation of the engine and keep the engine spinning evenly. As with so many parts of a car, the flywheel supplied from the factory is not designed with performance driving in mind.

Factory flywheels tend to be quite heavy, designed for smoothness and fuel economy above all else. The weight of the flywheel will slow down the engine revving up, and mean that the revs "hang" a bit. If you're trying to quickly downshift, this means you will have to blip the throttle for longer to get the lower gear in.

If you're upshifting, it can mean the revs don't fall as quickly as you like. A lighter Fidanza flywheel will give the drivetrain a much keener, more rev-happy feel. This is sure to put a smile on your face every time you push the accelerator pedal. A lighter, more responsive engine will rev up and down quicker, allowing quicker shifts and putting you more in control.

This is particularly useful as you blip the throttle for downshifts. You don't want to take too much weight out of the flywheel on a road car though, because with too little weight you will struggle with things like hill starts where you want a bit of mass in the driveline to stop the engine stalling. Fidanza aim for a sweet spot of 40-60% lighter than stock. This is ideal for fast-road driving. Light enough to enhance driveability, but not too light for the things you need your daily driver to be able to do.

On many modern vehicles, the factory flywheel will also be dual-mass - this where the flywheel is split in two and the two halves have springs or bushes between them to damp the loads from the engine. While this does increase smoothness, the springs or bushes do wear and the increased power of a tuned engine will cause them to wear out sooner. Replacing this dual-mass component with a solid flywheel takes a potential failure point out of the equation, and is definitely a worthwhile upgrade if you're increasing the torque of your engine or fitting a harsher clutch compound. Fidanza Lightweight Aluminium Flywheels come with a replaceable friction surface, so as the flywheel wears you can replace this surface instead of having to machine the flywheel.

The main mass of the flywheel is made from billet T6 6061 or T4 2024 aluminium. These are high-performance alloys, rigid and resistant to heat.

Billet machining is where the part being machined starts as a single block. This means it's literally a solid chunk of metal, with no weak points. The ring gear is also replaceable and is made from hardened, high carbon 1050 steel - very long-lasting. Fasteners are military spec, high-tensile steel. These are all rugged, high-quality materials. Any subsequent orders can be delivered to an alternative address. ORDER NOTES - Due to the automated system we operate, we cannot guarantee to be able to view any notes or comments you add to your order. OVERSEAS ORDERS - Please be aware that we are unable to alter the value or description marked on orders destined overseas for the purposes of avoiding having to pay duty on your order. LISTING IMAGES - In most cases, the images used on our listings are generic and for illustration purposes only. Please ensure you read the listing title and description for an accurate summary of what is included in the listing. We are putting the'customer' back into'Customer Service'. Our shop is designed to be fast, clear and easy to use. However, we want you to be confident that if you have any questions or queries regarding any of our listings, our dedicated team of experts are at the other end of a telephone or keyboard waiting to help. Express and guaranteed services will need to be selected and paid for at time of ordering.

At JJC, we strive to keep feedback 100% positive. We do this by offering quality products and 1st class customer service. Our customers satisfaction is the most important thing to us at JJC.

BOX 2333, Kencourt T/A JJC Race and Rally, Wrexham, LL11 0HB. The item "Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681" is in sale since Friday, August 7, 2020. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Performance Transmission\Performance Flywheels". The seller is "jjcraceandrally" and is located in Wrexham.

This item can be shipped worldwide.
  • Manufacturer: Fidanza
  • Brand: Fidanza
  • MPN: 191681
  • EAN: Does not apply
  • Manufacturer Part Number: 191681

Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681   Fidanza Lightweight Aluminium Flywheel Fits Honda Integra TypeR DC2 191681