SPC Stage 3 Copper Ceramic Racing Clutch Kit is a brand new Stage 3 heavy duty racing pressure plate with Stage 3, 6-Puck Sprung Copper Ceramic Racing Disc setup can hold and 70% more pressure increase over stock. If you want the best the industry has to offer, ask for SPC 6-Puck Sprung Copper Ceramic Racing Disc. The SPC Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced hybrid iron and carbon combination delivering aggressive bite and increased thermal capacity.
Uncharacteristic of the typical aggressive racing disc, the SPC Racing 6-puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality'upgrade' from the original equipment clutch.This kit comes with everything you need for a new clutch job or clutch upgrade. If you are selecting a kit without a new flywheel, then be sure to resurface and rebalance your old flywheel prior to installation for best performance and result. The SPC Forged Chromoly lightweight flywheel carries significant benefits, with no disadvantages. Due to its reduced mass, it allows an engine to have quicker throttle response and rev faster under acceleration. Conversely, under a drop throttle condition, the car will slow down quicker due to less rotational mass at the crank. Though it does not create additional horsepower, the flywheel does allow the engine to more rapidly transfer its power to the drive train. You lose nothing in reliability, safety, or drivability on the street. What you gain is neck-snapping acceleration from your car. Using a lightweight, SPC lightweight flywheel is a race proven way to improve the performance of any street or race car.
Lightweight flywheels have been used for many years by the world's most elite cars to improve both useable horsepower and extend engine life. SPC Stage 3 Heavy Duty Pressure Plate (2100lbs Clamping Load). SPC Stage 3 6-puck Sprung Ceramic Racing Disc (220mm, 24 Spline).SPC Forged Chromoly Lightweight Racing Flywheel (9lbs). SPC Premium Heavy Duty Clutch Throwout Release Bearing. SPC Premium Heavy Duty Clutch Pilot Bearing. SPC Premium Heavy Duty Clutch Alignment Tool.
Fits 1990 - 1991 Acura Integra (1.8L DOHC 4cyl B18). Manufacture Part Number : SPC-XT54113HP3 SPC-XT54113CF.Surface Finish : Cast Iron, Copper-Ceramic Sprung, Forged Chromoly, Steel. Country of Manufacture : United States. FILE PICTURES ARE FOR REFERENCE ONLY. Must be in brand new, resalable condition.
We are located in Southern California. The item "SPC STAGE 3 CLUTCH+9LBS FLYWHEEL KIT Fits 1990-1991 ACURA INTEGRA RS LS GS B18" is in sale since Thursday, October 17, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Clutches & Parts".
The seller is "clutchxperts_usa" and is located in Anaheim, California. This item can be shipped worldwide.