Flywheel Fits Integra

SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18

SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18
SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18
SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18
SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18
SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18
SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18
SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18

SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18    SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18
SPC Stage 4 Miba Racing Clutch Kit Is a brand new stage 4 Xtreme Duty Racing Pressure Plate With Stage 4. 6-Puck Miba Racing Disc Setup can hold and 70% more pressure increase over stock. SPC Stage 4 Miba 6-Puck Miba Solid Rigid Racing Disc. A Miba Composite Disc is the best friction material in the clutch market.

If you want the best the industry has to offer, ask for SPC 6 Puck Miba Racing Disc. The SPC Racing 6 Puck Miba Disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced Miba Delivering Aggressive Bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, The SPC Racing 6 Puck Miba Strip Disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement.

This system is recommended as the finest quality'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. If you are selecting a kit without a new flywheel, then be sure to resurface and rebalance your old flywheel prior to installation for best performance and result. Street Or Long Life Of Clutch Break-In Required.

Features Of SPC Stage 4 Miba Racing Clutch System. Heavy Duty Stage 4 Heavy duty racing pressure plate. Precision heat treated single diaphragm. Re-Arched Diaphragm for Superior Engagement. NO unnecessary increase in pedal pressure.

More Grip Power, longer lasting. High Temperature Resistance: Up To 930F (500C), Short Time Up To 1650F (900C). High And Stable Level Of Friction Coefficient. Miba Generates 3 To 15% Lower Torque Peaks Compared To The Competition; Reduces Gear Shocks Loads And Same Material As Using Aircraft Brakes. Miba Friction Group Has Been A Development Partner And Supplier Of High-Performance Friction Materials To The Automotive And Machine Industry For Over 30 Years.

We Offer Optimized Components For Clutches, And Use High-Quality Materials And Innovative, Technologically Advanced, Processes To Ensure Excellent Wear-Resistance And Friction Coefficients. Clutch Segments Generate The Friction Needed For Torque Transfer From Engine To Transmission, Enabling The Vehicle To Start. They Are Characterized By Particularly High Temperature Resistance And Low Wear. Friction Materials Are An Important Performance Element In Vehicle And Machine Clutches, And Play A Key Role In Overall Efficiency. The SPC Forged Chromoly lightweight flywheel carries significant benefits, with no disadvantages.

Due to its reduced mass, it allows an engine to have quicker throttle response and rev faster under acceleration. Conversely, under a drop throttle condition, the car will slow down quicker due to less rotational mass at the crank.

Though it does not create additional horsepower, the flywheel does allow the engine to more rapidly transfer its power to the drive train. You lose nothing in reliability, safety, or drivability on the street. What you gain is neck-snapping acceleration from your car. Using a lightweight, SPC lightweight flywheel is a race proven way to improve the performance of any street or race car. Lightweight flywheels have been used for many years by the world's most elite cars to improve both useable horsepower and extend engine life. SPC Stage 4 Heavy Duty Pressure Plate (2200lbs Clamping Load). SPC Stage 4 6-PUCK Solid Ceramic MIBA Racing Disc (220mm, 24 Spline). SPC Forged Chromoly Lightweight Racing Flywheel (9lbs). SPC Premium Heavy Duty Clutch Throwout Release Bearing. SPC Premium Heavy Duty Clutch Pilot Bearing.

SPC Premium Heavy Duty Clutch Alignment Tool. Fits 1994 - 2001 Acura Integra (1.8L DOHC 4cyl B18).

Manufacture Part Number : SPC-XT54019INTHP4RIG SPC-XT54019INTCF. Surface Finish : Cast Iron, Copper-Ceramic MIBA Solid, Forged Chromoly, Steel. Country of Manufacture : United States. FILE PICTURES ARE FOR REFERENCE ONLY.

Must be in brand new, resalable condition. We are located in Southern California. The item "SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18" is in sale since Friday, October 18, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Clutches & Parts". The seller is "clutchxperts_usa" and is located in Anaheim, California.

This item can be shipped worldwide.

  • Manufacturer Part Number: SPC-XT54019INTHP4RIG SPC-XT54019INTCF
  • Warranty: Yes
  • Brand: SPC
  • Country/Region of Manufacture: United States
  • Surface Finish: Cast Iron, Copper-Ceramic MIBA Solid, Forged Chromoly, Steel
  • Clutch Material: Copper-Ceramic
  • Clutch Disc Style: Puck
  • Pressure Plate Type: Diaphragm
  • Torque: 359lb-ft
  • Horse Power: 379HP


SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18    SPC STAGE 4 HD CLUTCH+9LBS FLYWHEEL KIT Fits 1994-2001 ACURA INTEGRA 1.8L B18